U3022BH10
Service Information
Service Information
This section provides information to troubleshoot and repair the Test Set. Refer to
"Keysight Support, Services, and Assistance" on page 123
for information on returning your test
set to Keysight Technologies.
No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock do not remove covers.
These servicing instructions are for use by qualified personnel only. To avoid
electrical shock, do not perform any servicing unless you are qualified to do so.
Replaceable Parts
The following replaceable parts are available from Keysight Technologies "Find-A-Part" system
on the web at
www.keysight.com/my/faces/fapHomePage.jspx
.
Table 23
Available Replacement Parts (SPO)
Description
Keysight Part
Number
Switch, Multiport (40 GHz terminated)
87106-60065
Fuse (5 A 250 V non-time delay Socket
2110-0709
Fuse (8 A 250 V non-time delay 0.0146 Ohm
2110-0342
RF Cable, Semi-Rigid, Front Panel Jumper
N5222-20091
PWR Supply (AC/DC SWG 650W 9- Output)
0950-4729
Couplers, 26.5 GHz
5087-7756
Test Set I/O Cable
N4011-21002
Fan Assembly (rear panel)
87050-60027
DUT Control Board
U3020-63223
U3022BH10 User's and Service Guide
95
