2
Service and Maintenance
44
Keysight U1818A/B Operating and Service Manual
Figure 2-36
ZIF tip positioned and soldered in place
5
Remove ZIF probe head and leave ZIF tip behind for future connection. It is
best to use a non-conductive, pointed object such as a tooth pick or plastic
tool. Hold on the heat-shrink part of the probe head to support the ZIF tip
while releasing the latch.
Figure 2-37
shows a toothpick releasing the latch on
the ZIF connector and
Figure 2-38
shows the ZIF tip left behind in the DUT
with the latch open, ready for future connections.
