Keysight Technologies U1273A, Quick Start Manual

Page: 19 / 219

Keysight U1273A/U1273AX Quick Start Guide 19
ENGL
ISH
Current measurements
Set up your multimeter as shown in the figure
below to perform current measurements. Press
to switch between AC, DC, AC+DC, or %
scale current measurements. When measuring
DC current from a mixed signal in DC
measurement mode, ensure that the Filter ( ) is
enabled.
Shift
View
E sc
WARNING
Always use the proper function, range, and terminals for
current measurements. Set the positive input terminal to
the
terminal for currents below 440 mA, and
the terminal for currents above 440 mA.
NOTE
For better accuracy when measuring low currents
(up to
μ
A), turn the rotary switch to the position.