background image

System Requirements

Table 

10

  

External PC Requirements

General Information

Window 7 SP1 and Windows 10 (64-bit only)
Intel i5 6th generation or newer / Intel Xeon 3E v3 or newer
16 GB recommended; 4 GB minimum
2 GB available disk space minimum
1064 x 768 minimum
USB 3.0 port directly connected to Intel chipset

Operating System
Processor Speed
Available Memory
Available Disk Space
Display Resolution
USB

Table 1

1

  

Regulatory and Safety Compliance

Instrument Drivers

Keysight IO Libraries

IO Libraries Suite 2019 (18.1.24130.0) or later

EMC

Complies with the essential requirements of the European EMC 
Directive and the UK Electromagnetic Compatibility Regulations 
2016, as well as current editions of the following standards (dates 
and editions are cited in the Declaration of Conformity):

IEC/EN 61326-1

CISPR Pub 11, Group 1, class A

Caution: This equipment is not intended for use in residential 
environments and may not provide adequate protection to radio 
reception in such environments.

AS/NZS CISPR 11

CAN ICES/NMB-001(A)

This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.

Safety

Complies with the following standard (dates and editions are cited 
in the Declaration of Conformity):

IEC/EN 61010-1

Acoustic Statement: (European Machinery Directive)
Acoustic noise emission
LpA <70 dB
Operator position
Normal operation mode per ISO 7779

Temperature

For indoor use only.

46

Keysight P939xA Streamline Customs User's Guide

Summary of Contents for P939 A Series























































Reviews: