Installation Note N9038-90039
3
Option EXM – External Mixing Upgrade
Option EXM – External Mixing Upgrade
This document provides detailed instructions for the installation of Option EXM, External Mixing
upgrade in the N9038A MXE EMI Receiver. Please be sure to read this entire document before
attempting to perform this upgrade. Then, be sure to perform the steps in this procedure in the
order that they are listed so that the installation will complete properly and the instrument will
function as desired when completed.
Prerequisites
In addition to the serial number requirements mentioned above, there is one other prerequisite that
must be met before installing this Option EXM upgrade in an N9038A MXE EMI Receiver. It is:
Options:
N9038A-W7X Windows Embedded Standard 7, 64 bit OS
Instructions on how to verify that this prerequisite has been met prior to the installation of this
upgrade are included later in this document.
If the instrument being upgraded does not meet the serial number requirements mentioned above
do not proceed with this upgrade, a different upgrade will be required to add external mixing to this
instrument.
Products Affected:
MXE N9038A
Requirements:
Option 503, 508, 526
≥
MY/SG55260000
Option 544
All
To Be Performed By:
(X) Keysight Service Center
(X) Advanced User
( ) User
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
1.5 Hours
1.0 Hours
1.0 Hours
