Keysight Technologies N8241A, User Manual

Page: 44 / 125

Chapter 2 45
Basic Operation
Using the Graphical User Interface
Enter Repetition Count secondary window.
11.
Enter 5000 repetitions and click OK .
12. Repeat steps 9 , 10 , and 11 for the 100 MHz and two-tone waveforms.
13. In the Sequence Definition area, select segment ID 2 and move it below ID 3
using the down arrow.
14. Click Modify and change the count to 50000 . The sequencer tab should look
like Figure 2-5 .
Figure 2-5 Sequencer Tab
15.
Click Download & Play . The spectrum of the sequence should be similar to the
one shown in Figure 2-6