Installation Note N5245-90113 23
Description of the Upgrade
Installation Procedure for the Upgrade
3.
Follow the two instructions shown in
. New parts are listed in
of this document.
Figure 6
A33 - A36 Test Port Coupler Assembly
Step 19. Install the LED Boards and Test Port Coupler Assemblies to
the Test Set Front Plate
1.
Remove two screws from each LED board and remove the boards from the
2-port test set front plate of the PNA.
2.
Remove the 2-port test set front plate from the test set deck.
3.
Follow the instructions shown in
.
