8 Installation Note N5245-90113
Description of the Upgrade
Items Included in the Upgrade Kit
-
Tools Required for the Installation
About Installing the Upgrade
Items Included in the Upgrade Kit
1
Check the contents of your kit against the following list. If any part is missing or
damaged, contact Keysight Technologies. Refer to
Description
Qty
Part Number
T-6 TORX driver - set to 4 in-lbs (0.45 N.m)
1
N/A
T-10 TORX driver - set to 9 in-lbs (1.02 N.m)
1
N/A
T-20 TORX driver - set to 21 in-lbs (2.38 N.m)
1
N/A
5/16-in (8 mm) nutsetter or open end torque wrench - set to 10 in-lbs
(1.13 N.m)
1
N/A
5/16-in (8 mm) nutsetter or open end torque wrench - set to 21 in-lbs
(2.38 N.m)
1
N/A
3/16-in (5 mm) nutsetter or open end torque wrench - set to 6 in-lbs
(0.68 N.m)
1
N/A
5/8-in (16 mm) nutsetter or open end torque wrench - set to 21 in-lbs
(2.38 N.m)
1
N/A
9 mm nutsetter or open end torque wrench - set to 21 in-lbs (2.38 N.m)
1
N/A
1-in (25.4 mm) torque wrench - set to 72 in-lbs (8.15 N.m)
1
N/A
1/4-in (6 mm) open end wrench
1
N/A
Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections
except the front and rear panel cable connectors. On these, use a 9 mm
nutsetter or open end torque wrench set to 21 in-lb.
Products affected
N5244B and N5245B Option 219
Installation to be performed by
Keysight service center or personnel qualified by Keysight
Estimated installation time
5 hours
Estimated adjustment time
0.5 hours
Estimated full instrument calibration time
4.5 hours
1. In addition to the upgrade kit, the shipment includes an Software Entitlement Certificate. Refer to
for important information about this certificate.
