04 | Keysight | MXA X-Series Signal Analyzer N9020A - Configuration Guide
Step 8. Add optional features
Description
Option number
Additional information
Enhanced display package
N9020A-EDP
Includes spectrogram, trace zoom, and zone span
Basic EMI precompliance
N9020A-EMC
Perform basic EMI precompliance measurements with CISPR 16-1-1 detectors and
bandwidths; tune and listen, and measure at marker are also available
External source control
N9020A-ESC
External source control for Keysight EXG, MXG, and PSG signal generators; supports
external mixing; includes 3 BNC cables and 1 cross-over LAN cable
Step 9. Choose operating system
Description
Option number
Additional information
Windows Embedded Standard 7
Standard
Licensed as N9020A-W7X
Step 10. Add security features
Description
Option number
Additional information
Additional removable solid-state drive
N9020A-SSD
Provides a fully-imaged, removable solid-state drive in addition to the one installed
in the instrument
Exclude launch program
N9020A-SF1
Prevents the launching of Windows programs from the instrument application
Prohibit saving results
N9020A-SF2
Prevents the saving/recall of measurement results or user configurations to/from
instrument's data storage
Step 11. Add rear panel output utilities
Description
Option number
Additional information
Second IF output
N9020A-CR3
Wideband IF out; center frequency depends on IF path; output on Aux IF connector
at rear panel
Arbitrary IF output
N9020A-CRP
IF out 10 to 75 MHz (in 500 kHz steps); output on Aux IF connector at rear panel
Y-axis screen video output
N9020A-YAS
Screen video (0-1 volt open circuit) on rear panel analog out
Real-time link
Standard
The LVDS connector allows MXA to connect to X-COM data recorder for data
streaming (up to 40 MHz BW), and to the N5106A PXB baseband generator and
channel emulator; requires Option B40 or DP2; licensed as N9020A-RTL
