Keysight Technologies M9506A-BC1, Instruction Manual, Page: 75 / 96

M9506A-BC1 5-Slot AXIe Chassis with Integrated Controller User Guide 75
SCPI Programming Interface 4
Common Commands
The following commands are implemented for compatibility with the SCPI99
standard. However, these commands do not provide either active interaction with
the digitizers or results related to the digitizers. As the configuration of the
M9506A chassis with the integrated controller can be a mix of different digitizers,
the use of direct digitizer commands listed above is the supported use model for
controlling and querying digitizer operations.
*OPC?
Query
*OPC?
Description This is an Operation Complete query. Always returns the value of 1.
Example
-> *OPC?
<- 1
*ESE[?]
Command
*ESE
Description This command enables the Standard Event register.
Example
-> *ESE 255
Query
*ESE?
Description This query enable the Standard Event register query.
Example
-> *ESE?
<- +255
*CLS
Query
*CLS
Description This command clears the event register in all register groups. No value available
for entry.
Example
-> *CLS