Keysight Technologies M9347AH02, Getting Started Manual, Page: 6 / 20

1 Installing the PXI Chassis Hardware
Keysight M9347A
H02
Getting Started Guide 1
1 Installing the PXI Chassis Hardware
The PXI System consists of the following items:
M9037A PXIe High Performance Embedded Controller
(or an appropriate
external controller; see supported list at https://www.keysight.com/ca/en/
assets/7018-02925/technical-overviews/5990-7632.pdf )
M9019A
PXI Chassis
M9347
A Module
Keysight M9347
A
software
The installation procedure in this chapter will lead you through setting up the
hardware. After that is complete, you will refer to
2 Installing the Graphical User
Interface Softpanel (page 5) .
This installation procedure will lead you through a series of steps to set up your PLTS
hardware. The following is a list of the installation steps:
Step 1. Verify your System Shipment
Step 2. Set Up the PXI Chassis
Step 3.
Insert
the M9347
A into
the PXI Chassis
Step 4. Power up the Chassis
Step 5. Install the M9347
A
Software on the PXIe Controller
Verify your System Shipment
1. Unpack your system from the containers in which it was shipped.