Keysight M9035A PXIe Embedded Controller Startup Guide
9
Introduction
Introduction
Keysight’s M9035A is a Windows PC that fits in slot 1 of a PXIe chassis. It is a 3U,
4-slot PXIe Embedded Controller providing:
-
Intel® CoffeeLake Quad-Core i3-8100H processor with UEFI BIOS
-
8GB standard (or optional 16 GB) 260-pin DDR4-2666 RAM Memory
*
-
256 GB SATA 2.5 inch solid state drive (SSD) front panel removable
-
Integrated IO on the front panel includes two Gigabit Ethernet ports, four USB
2.0 ports
†
, two USB 3.0 ports, GPIB connector, two DisplayPort video ports
(also known as Disp+)
-
Preloaded with Keysight IO Libraries and Microsoft Windows operating system
-
Pre-installed IVI drivers for the Keysight PXIe chassis
Related Documentation
A Windows OS and M9035A drivers were installed at the factory. All the drivers
required to operate the controller and chassis were installed. No additional
drivers are required, until you add modules and instruments.
Complete M9035A documentation, as well as the PXIe Chassis Family
documentation, is pre-installed on the M9035A SSD. It can be found from the
Windows Start menu under Keysight. Descriptions of the PXIe Chassis Family
can be found at:
www.keysight.com/find/pxie-chassis
Adobe Reader is required to view the documentation supplied on the M9035A. It
is available free at
You should install this on your M9035A prior
to attempting to open a PDF file.
For the latest M9035A specifications, go to:
.
For the IVI trigger driver, help file, program examples, etc. go to:
C:\ProgramFiles\IVI Foundation\IVI\Drivers\KtMTrig
or
C:\ProgramFiles (x86)\IVI Foundation\IVI\Drivers\KtMTrig
To start the Soft Front Panel interface, from the Window’s Start menu, under
Keysight, look for Embedded Controller SFP.
* The M9035A has two 204-pin, DDR4-2400 SODIMM sockets.The standard M9035A configuration is a single
8GB memory module with a factory option to provide 16GB memory. To use the full 16GB memory, a 64-bit OS
must be used.
† The USB 2.0 and 3.0 ports do not support the USB Battery Charging specification. Do not connect
non-standard or defective USB devices.
