Keysight M8196A – Arbitrary Waveform Generator
Getting Started Guide
2
M8196A Software
Installation
This chapter explains the steps required to install M8196A software package.
2.1
Pre-Requisites
The following are the pre-requisites for installing Keysight M8196A software:
•
The supported operating systems are:
−
Window 10 (32 bit or 64 bit)
−
Windows 8.1 (32 bit or 64 bit)
−
Windows 8 (32 bit or 64 bit)
−
Windows 7 (32 bit or 64 bit)
•
Ensure that you have Keysight IO Libraries Suite Version 16.3 or higher
installed on your system. The Keysight IO Libraries Suite can be found on
the CD that is part of shipment content or at
http://www.keysight.com/find/iosuite
Even if a non-Keysight I/O library is already installed on your PC, it is still necessary
to install the Keysight I/O library. The Keysight I/O library will install as “secondary”
I/O library in this case. This use case is fully supported. There only needs to be some
additional considerations when doing SCPI remote programming. For more
information on SCPI remote programming, refer to M8196A User's Guide.
