4 M8196A Maintenance
25
Keysight M8196A – Arbitrary Waveform Generator Getting Started Guide
4.2
Power and Ventilation Requirements
For power and ventilation requirements, refer to:
•
http://www.keysight.com/find/M9514A
for 13-slot chassis related
documentation.
•
http://www.keysight.com/find/M9505A
for 5-slot chassis related
documentation.
•
http://www.keysight.com/find/M9502A
for 2-slot chassis related
documentation.
4.3
Thermal Protection
Overheating
Detection
The instrument monitors its internal temperature. If the temperature exceeds
approximately 80°C the power supply is switched off. The instrument will not turn on
automatically if the temperature is decreasing again.
Fan Failure
If a fan is broken or prevented from operating by a blockage the temperature will
increase. When the temperature exceeds approximately 80°C the overheating
detection switches off the instrument for safety reasons. For reliability it is
recommended to send instruments with broken or defective fans immediately to
Keysight Service for repair.
4.4
Battery
The M8196A does not have a battery.
4.5
Cleaning Recommendation
To prevent electrical shock, disconnect the instrument from mains before cleaning.
Use a dry cloth or one slightly dampened with water to clean external case parts. Do
not attempt to clean internally.
