2 AXIe Chassis
28
M8190A Getting Started Guide
c.
When the system is first configured and started, the TCP/IP LAN
connection will not be available. You should manually add the LAN
instrument manually. To do so, select LAN Instrument from the list of
devices that can be added, at the left of the screen. While doing so,
make sure that the firmware is running in the background.
d.
Fill in the instrument's properties. The IP address of the instrument
will be the IP address of the PC running the firmware or localhost.
e.
Test the connection.
f.
Click Accept.
For more details, refer to online help of Keysight Connection Expert.
Query
The M8190A firmware comes up, but the M8190A SFP (Soft Front Panel) does not
comes up.
Solution
Ensure that same version of both M8190A Firmware and M8190A IVI drivers must be
properly installed.
Query
The M8190A firmware display an error message asking for a log file.
Solution
The stated folder might be a hidden one. When entering the path manually in the
File Explorer (…
\AppData\...) it should show up.
Query
M8190A firmware upgrade is not successful.
Solution
If your firmware upgrade is not successful, follow the given steps:
1.
Manually uninstall the old versions of the M8190A Firmware and the
M8190A IVI driver.
2.
Now, start the fresh installation of the new M8190A firmware version.
Query
The AXIe chassis or a module does not power up.
Solution
If the chassis or a module does not appear to power up, check the following:
The circuit breakers at the rear of the chassis are set to the right, which is the
ON position.
The AC power cords are connected to a working power source.
The electrical circuits are not overloaded. Check the combined power
requirements of all equipment on the same circuit.
There are no empty slots in the chassis. Leaving slots empty can overheat the
inserted modules, causing them to shut down.
Query
Contacting Keysight for sales, service and support.
Solution
To contact Keysight for sales, service and support, go to;
www.keysight.com/find/contactus
