Keysight M8190A
–
Arbitrary Waveform Generator
Getting Started Guide
2
M8190A Software
Installation
This chapter explains the steps required to install M8190A software package.
2.1
Pre-Requisites
The following are the pre-requisites for installing Keysight M8190A software:
The supported operating systems are:
Windows 10 (32 bit or 64 bit)
Windows 8.1 (32 bit or 64 bit)
Windows 8 (32 bit or 64 bit)
Windows 7 (32 bit or 64 bit)
Ensure that you have Keysight IO Libraries Suite Version 17.3 or higher
installed on your system. The Keysight IO Libraries Suite can be found on the
CD that is part of shipment content or at
http://www.keysight.com/find/iosuite
Even if a non-Keysight I/O library is already installed, it is still necessary to install the
Keysight I/O library. The Keysight
I/O library will install as “secondary” I/O library in this
case. This use case is fully supported. There only needs to be some additional
considerations when doing SCPI remote programming. For more information on SCPI
remote programming, refer to M8190A User's Guide. A non-Keysight
“primary” I/O library
must support the HiSLIP protocol otherwise; the Soft Front Panel and the IVI drivers will
not work.
