manualshive.com logo in svg

Keysight Technologies M8132A, User Manual, Page: 86 / 106

Share
Download
Keysight Technologies M8132A User Manual Download Page 86

86

Keysight M8132A 640 GSa/s Digital Signal Processor User’s Guide

6

Remote Programming

 

:ODI:PORT<N>:CAPability:TRMatch?

Query

:ODI:PORT:CAPability:TRMatch?

Parameters

None 

Description

The query returns a Boolean value, indicating if transmission rate matching 

is supported.

Return Format

[:ODI:PORT:CAPability:TRMatch] <rate-match><NL>

Example

:ODI:PORT:CAP:TRM? -> 0

:ODI:PORT<N>:NAME?

Query

:ODI:PORT:NAME?

Parameters

None 

Description

The query returns the name of the port.

Return Format

[:ODI:PORT:NAME] <name><NL>

Example

:ODI:PORT:NAME? -> “ODI1”

:ODI:PORT<N>:ACTivate

Command

:ODI:PORT<N>:ACTivate <lane_rate>, <tx_burst_max>, 
<directionality>, <tx_flow_control>, 
<rx_flow_control>, <options>

Description

The command switches on the optical port using the specified parameters.

<N>

 An integer to select the ODI port, 1-4.

<lane_rate>

 Lane rate

R141

 14.1 Gbit/s.

<tx_burst_max> 

Maximum transmit burst size in bytes. Possible values 

are 256 and 2048

<directionality>

 Directionality

PRODucer 

Transmit direction

CONSumer

 Receive direction

Summary of Contents for M8132A











































































































Reviews:

No comments