Keysight Technologies InfiniiVision 3000T X Series, Programmer'S Manual

Page: 1031 / 1420

:TRIGger Commands
33
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1031
:TRIGger[:EDGE] Commands
Table 139 :TRIGger[:EDGE] Commands Summary
Command Query Options and Query Returns
:TRIGger[:EDGE]:COUPl
ing {AC | DC |
LFReject} (see
page 1032
)
:TRIGger[:EDGE]:COUPl
ing? (see
page 1032
)
{AC | DC | LFReject}
:TRIGger[:EDGE]:LEVel
<level> [,<source>]
(see
page 1033
)
:TRIGger[:EDGE]:LEVel
? [<source>] (see
page 1033
)
For internal triggers, <level>
::= .75 x full-scale voltage from
center screen in NR3 format.
For external triggers, <level>
::= ±(external range setting) in
NR3 format.
For digital channels (MSO
models), <level> ::= ±8 V.
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | EXTernal } for MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger[:EDGE]:REJec
t {OFF | LFReject |
HFReject} (see
page 1034
)
:TRIGger[:EDGE]:REJec
t? (see
page 1034
)
{OFF | LFReject | HFReject}
:TRIGger[:EDGE]:SLOPe
<polarity> (see
page 1035
)
:TRIGger[:EDGE]:SLOPe
? (see
page 1035
)
<polarity> ::= {POSitive |
NEGative | EITHer | ALTernate}
:TRIGger[:EDGE]:SOURc
e <source> (see
page 1036
)
:TRIGger[:EDGE]:SOURc
e? (see
page 1036
)
<source> ::= {CHANnel<n> |
EXTernal | LINE | WGEN | WGEN1 |
WMOD} for the DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | EXTernal | LINE |
WGEN | WGEN1 | WMOD} for the MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
Note: WGEN and WGEN1 are
equivalent.