7) Press , , , and then press to open the
DIO Configuration dialogue
.
8) Press and select to specify the
Digital I/O pin numbe
r; the properties of this pin is
what we will configure.
9) Rotate to select
Input/output function
and press to edit it. Then press to set
it to
Trigger input
.
10) Rotate to select
Polarity
and press to edit it. Then press to set it to
Positive polarity
.
11) Press to save the changes.
(1) Press More...
(2) Press I/O
(3) Press DIO
(4) Press Config
20 | Keysight | Sourcing Precise Current/Voltage Sinusoidal Waveforms Using the B2961A/62A – Demo Guide
