Keysight B1507A User’s Guide, Edition 1
4- 31
GUI Reference
Capacitance Measurement Software
Summary of Files
The following shows the summary of the files handled by the capacitance
measurement software.
Table 4-2
Summary of Files
File name of Measurement Data File on Auto-saving
An auto-saved measurement data file is named as the following rule.
1. Concatenates the device ID, date and time on save by an underscore (_).
2. Concatenates the file extension (.pda-cap.txt) to the end of the “step 1” string.
3. If the “step 2” file name duplicates the existing file name, concatenates the serial
number from 2 enclosed by brackets and the file extension to the end of the “step
1” string.
File Type
Description
Extension
Folder as Initial Setting
Setup File
Setup data
You can save this if needed.
*.pda-cap
(You can specify the folder
when saving the data)
Measurement
Data File
Setup data and measurement data
including the device ID and comment
This is automatically saved after the
measurement.
You can optionally save this.
*.pda-cap.txt
C:\Users\<user name>\
Documents\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\DataStore
(You can change this)
Calibration Data
File
Calibration data
This is automatically saved after the
calibration execution.
*.pda-cap.cal
C:\ProgramData\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\UserCalibrationData
Factory Default Calibration data
This is used when there is no user
calibration data.
C:\ProgramData\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\CalibrationData
Summary of Contents for B1507A
