Keysight Technologies 85059V, Operating And Service Manual

Page: 6 / 54

1-2 Keysight 85059V Operation and Service Guide
General Information
Verification Kit Overview
1-
Verification Kit Overview
The Keysight 85059V 1.0 mm verification kit provides a set of standards with
known characteristics, traceable to primary standards in the Keysight
Technologies calibration lab. This set of standards is used to verify your
measurement calibration and also to verify that your PNA system is operating
within its specifications. The frequency range covered by the 85059V is from
10 MHz to 110 GHz.
Kit Contents
The 85059V verification kit includes the following items:
— Matched thru
— Mismatched thru
— Storage box
— User’s and Service Guide (this manual)
— Form determining recalibration due date
— USB drive that contains factory-measured verification data for use with the
PNA system verification process
— Data sheet for each device that contains factory-measured verification data
— Anti-virus scan report
Refer to
Chapter 6 for a complete list of replaceable part numbers.
Calibration Definitions
The 85059V verification kit is intended to be used with the 85059V 1.0 mm
calibration kits. Prior to performing a calibration with your PNA, the calibration
kit must be selected and the calibration definitions for the devices in the kit
installed in the PNA. Refer to your PNA Help system for instructions on
selecting the calibration kit and performing a calibration.
IMPORTANT! Backup copies of the data sheets, anti-virus scan reports,
and the data contained on the USB drive should be made immediately
upon receipt of the verification kit.
A file containing the verification data for your kit is maintained for 18
months from the time of measurement. If you lose this data, refer to
https://service.keysight.com/infoline/public/default.aspx or contact
Keysight. Refer to
page 5-5
.