Keysight Technologies 85058V, User'S And Service Manual

Page: 9 / 58

85058V 1-3
General Information
Incoming Inspection
Installation of the Calibration Definitions
The calibration definitions for the kit should be permanently installed in the internal memory or
hard disk of the PNA. They may already be resident within the analyzer, or you can download
them from Keysight’s Calibration Kit Definitions Web page at
http://na.support.keysight.com/pna/caldefs/stddefs.html . In addition , the calibration definitions
may be entered manually from the front panel. Refer to your PNA Help system for instructions.
Equipment Required but Not Supplied
Some items are required or recommended for successful operation of your kit, but are not
supplied with the kit. Refer to Table 6-3 on page 6-7 for a list of these items and for ordering
information.
Incoming Inspection
Verify that the shipment is complete by referring to the contents list in the shipping container.
Check for damage. The foam-lined storage case provides protection during shipping. Verify
that this case and its contents are not damaged.
If the case or any device appears damaged, or if the shipment is incomplete, contact Keysight -
refer to page 5-6 . Keysight will arrange for repair or replacement of incomplete or damaged
shipments without waiting for a settlement from the transportation company. Refer to
“Returning a Kit or Device to Keysight Technologies” on page 5-5 for instructions.