Keysight Technologies 85055A, User'S And Service Manual

Page: 14 / 60

2-4 Keysight 85055A User’s and Service Guide
Specifications
Mechanical Characteristics
2-
Figure 2-1 Connector Pin Depth
The gages for measuring type-N connectors compensate for the designed
offset of 5.26 mm (0.207 inch), therefore, protrusion and recession
readings are in relation to a
zero
reference plane (as if the inner and outer
conductor planes were intended to be flush).
Table 2-2 Connector Pin Depths
Connectors
Pin Depth
ab
a. A positive number indicates pin protrusion. A negative number indicates pin
recession.
b. There is some degree of pin depth measurement uncertainy, due to the limits of the
repeatablity of the mechanical pin depth gage.
millimeters inches
Attenuators
Male 0.0000 to –0.0076 –0.0000 to –0.0030
Female 0.0000 to –0.0076 –0.0000 to –0.0030
Airlines
c
c. The relationship between the length of the inner conductor and the length of the
outer conductor determines the airline center conductor recession. Refer to
“Gaging the Airline” on page 12 .
+0.0025
d
to -0.0100
d. In this case, the center conductor is 0.0025 mm (0.0001) inch longer than the
outer conductor.
+0.0001
d
to –0.0004