Keysight Technologies 16190B Operation And Service Manual Download Page 2

Notices

© 

Keysight Technologies

 

2000-2017

No part of this manual may be 

reproduced in any form or by any 

means (including electronic storage 

and retrieval or translation into a 

foreign language) without prior 

agreement and written consent from 

Keysight Technologies, Inc. as 

governed by United States and 

international copyright laws.

Trademark Acknowledgments
Manual Part Number

16190-90020

Edition

Edition 4, October 2017

Printed in Malaysia

Published by:

Keysight Technologies International 
Japan G.K,

1-3-3 Higashikawasaki-cho

Chuo-ku 
Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS 

DOCUMENT IS PROVIDED “AS IS,” 

AND IS SUBJECT TO BEING 

CHANGED, WITHOUT NOTICE, IN 

FUTURE EDITIONS. FURTHER, TO 

THE MAXIMUM EXTENT PERMITTED 

BY APPLICABLE LAW, KEYSIGHT 

DISCLAIMS ALL WARRANTIES, 

EITHER EXPRESS OR IMPLIED WITH 

REGARD TO THIS MANUAL AND 

ANY INFORMATION CONTAINED 

HEREIN, INCLUDING BUT NOT 

LIMITED TO THE IMPLIED 

WARRANTIES OF 

MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE. 

KEYSIGHT SHALL NOT BE LIABLE 

FOR ERRORS OR FOR INCIDENTAL 

OR CONSEQUENTIAL DAMAGES IN 

CONNECTION WITH THE 

FURNISHING, USE, OR 

PERFORMANCE OF THIS 

DOCUMENT OR ANY INFORMATION 

CONTAINED HEREIN. SHOULD 

KEYSIGHT AND THE USER HAVE A 

SEPARATE WRITTEN AGREEMENT 

WITH WARRANTY TERMS 

COVERING THE MATERIAL IN THIS 

DOCUMENT THAT CONFLICT WITH 

THESE TERMS, THE WARRANTY 

TERMS IN THE SEPARATE 

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software 

described in this document are 

furnished under a license and may be 

used or copied only in accordance 

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this 
product and for other Keysight 

products may be downloaded from 

the Web. Go to 

http://www.keysight.com/go/confor

mity

. You can then search by product 

number to find the latest Declaration 
of Conformity.

U.S. Government Rights

The Software is “commercial 
computer software,” as defined by 

Federal Acquisition Regulation 

(“FAR”) 2.101. Pursuant to FAR 

12.212 and 27.405-3 and 

Department of Defense FAR 

Supplement (“DFARS”) 227.7202, the 

U.S. government acquires 

commercial computer software 

under the same terms by which the 

software is customarily provided to 

the public. Accordingly, Keysight 

provides the Software to U.S. 

government customers under its 

standard commercial license, which 

is embodied in its End User License 

Agreement (EULA), a copy of which 

can be found at 

http://www.keysight.com/find/sweul

a

The license set forth in the EULA 

represents the exclusive authority by 

which the U.S. government may use, 

modify, distribute, or disclose the 

Software. The EULA and the license 

set forth therein, does not require or 

permit, among other things, that 

Keysight: (1) Furnish technical 

information related to commercial 

computer software or commercial 

computer software documentation 

that is not customarily provided to 

the public; or (2) Relinquish to, or 

otherwise provide, the  government 

rights in excess of these rights 

customarily provided to the public to 

use, modify, reproduce, release, 

perform, display, or disclose 

commercial computer software or 

commercial computer software 

documentation. No additional 

government requirements beyond 

those set forth in the EULA shall 

apply, except to the extent that those 

terms, rights, or licenses are 

explicitly required from all providers 

of commercial computer software 

pursuant to the FAR and the DFARS 

and are set forth specifically in 

writing elsewhere in the EULA. 

Keysight shall be under no obligation 

to update, revise or otherwise modify 

the Software.  With respect to any 

technical data as defined by FAR 

2.101, pursuant to FAR 12.211 and 

27.404.2 and DFARS 227.7102, the 

U.S. government acquires no greater 

than Limited Rights as defined in FAR 

27.401 or DFAR 227.7103-5 (c), as 
applicable in any technical data.

Safety Notices

CAUTION

 notice denotes a hazard. It 

calls attention to an operating 

procedure, practice, or the like that, 

if not correctly performed or adhered 

to, could result in damage to the 

product or loss of important data. Do 

not proceed beyond a CAUTION 

notice until the indicated conditions 

are fully understood and met. 

WARNING

 notice denotes a hazard. 

It calls attention to an operating 

procedure, practice, or the like that, 

if not correctly performed or adhered 

to, could result in personal injury or 

death. Do not proceed beyond a 

WARNING notice until the indicated 

conditions are fully understood and 
met.

Summary of Contents for 16190B






















Reviews: