Keysight Technologies 16190B, Operation And Service Manual

Page: 19 / 21

Keysight 16190B Performance Test Kit 19
Service
Repair
Calibration Period
The suggested initial interval for calibration is 12 months or sooner. The actual
need for calibration depends on the use of the kit. After reviewing the results of
the initial calibration, you may establish a different calibration interval that
reflect the usage and wear of the kit.
Repair
The performance test kit can be repaired only at Keysight Technologies
facilities. For complete information on repair, contact your nearest Keysight
Technologies office.
The cap for Open Termination, Short Termination, 50
Ω Termination and Airline
(50 Ω , 7mm) can be ordered with the part number as below:
2400  8.0 mrad  10 mrad  10 mrad
2600

8.0 mrad

12 mrad

10 mrad
2800  8.0 mrad No Calibration  10 mrad
3000

8.0 mrad

12 mrad No Calibration
1. Calibration uncertainty when shipped from the factory
Table 3-2 Impedance Phase

(Admittance Phase

) Calibration Uncertainty
1
Frequency
[MHz]
50  Airline with
OPEN
Airline with
SHORT
Description Keysight Part
Number
Qty
Cap, APC-7 (For 50 Ω ) 16190-25011 1
Guide (For Open, Short) 04291-21002 2
(1 for Open and 1 for Short)
CAP/Plug-PROT (For Airline) 1401-0123 2