Install the module
Please review all safety information located in Chapter 3, “Safety, Regulatory, and Environmental
Information,” of startup guide (M9370-90001) before proceeding with installing and using the analyzer.
1.
Power down the controller
PXI hardware does not support “hot-swap” (changing modules while power is applied to the chassis)
capabilities. Before installing or removing a module to/from the chassis, power-off the chassis to prevent
damage to the module
2.
Insert M937X modules in a chassis with a PXIe, or PXI-H chassis slots
The network analyzer module can be installed in any PXIe or hybrid PXI slot marked with a peripheral
slot compatibility image (solid black circle for PXIe, or solid black circle with the letter “H” for hybrid).
3.
Leave the 50 ohm loads attached as shown in below figure.
6
