ASSEMBLY
v
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Begin by connecting the front base frame (4) and rear base frame (5) to the side
frames (1) using:
8 x (22) Bolt
16 x (25) Washer
8 x (26) Nylon Locknut
Attach angle support (11) to rear base frame (5) using:
2 x (23) Bolt
4 x (28) Washer
2 x (27) Nylon Locknut
Attach main upright (6) to front base frame (4) using:
2 x (23) Bolt
4 x (28) Washer
2 x (27) Nylon Locknut
Connect angle support (11) to main upright (6) using:
2 x (22) Bolt
4 x (25) Washer
2 x (26) Nylon Locknut
STEP 1
