Keyprocessor Sirius i80, Installation Manual

Page: 6 / 15

2 Installation and use
By the use of ferrite, the card reader is insensitive to be installed on a metal surface.
2.1 Location

Determine the location where the Sirius card reader should be installed. There is a
maximum cable length between the reader and door controller.

Exception: using an external power supply, you can increase the achievable distance
between the door controller and card reader.

Install the reader with a minimum lateral distance of 20 cm from each other.
2.2 Mounting instructions
Mount the card reader preferably on an outlet
Picture 1: Sirius i80 measurements

Pull the cable through the mounting plate of the Sirius reader.

The screw hole of the card reader should be placed on the underside.

Mount the back plate of the card reader to the outlet, using the existing screws.

When not removed, remove the orange colored film of the Buzzer

Click the front of the card reader at the top of the mounting plate

Attach the front of the card reader to the mounting plate with the supplied 'special
mounting bolts.