1.3
Default reader configurations
When using a default Sirius i-series card reader, four configurations are possible
The configurations are described in the paragraphs below.
Remark:
For more information about the additional options, please contact your contact at
Keyprocessor.
Remark:
The Sirius-i80/P (Pincode) card reader will only work in combination with a Polyx
door controller.
1.3.1
Polyx/Orbit Mifare- MifareDesfire
Part number:
801-5101
Standard communication:
A Polyx based on RS485
An Orbit based on Clock/Data - MIFARE Classic & MIFARE DESFire EV1(coded)
Output length when using Clock/Data:
When using Mifare Classic, the output length is 8 digits
When using Mifare DESFire, the output length is 12 digits
Standard LED function:
When the reader is provided with power, the LED color is Red.
When the LED connection is switched to GND, the LED color is Green
Standard IO function:
When using Mifare Classic, the output length is 8 digits
A standard configured card reader does not use the extra IO functionality. When this
function is needed, you need to order another card reader. See chapter 1.3.3 & 1.3.4
Programmable:
The card reader is
not
programmable.
Summary of Contents for Sirius i80
Page 14: ...4 1 3 Data signal RS485...
Page 15: ...4 2 Certificates...
