11
Find the attached USB in the package, as indicated earlier in this
chapter, the USB cable was terminated by a Standard A type (the
big one)connector and a Mini B Type connectors(the small
one).To start to use the Beagle speaker quickly, please follow the
steps to have the basic installation.
STEP 1
Turn on your laptop computer and Windows operating system.
STEP 2
Hold the bundled USB cable.
STEP 3
Plug the
Mini B
type USB connector
(the small end) into pedestal’s mini
USB port.
STEP 4
Plug the
Standard A
type USB
connector into your computer’s
USB port.
After a USB detected sound, your computer’s speaker was turned off
and you’ll see
Beagle
’s internal LED turn ON and your computer’s
audio is reproducing by
Beagle
automatically.
NOTE
Beagle
speaker’s default was set 50% of system volume to
avoid the sudden burst sound. In order to let your
Beagle
speaker presents best audio performance, please adjust your
computer system volume to maximum or at least 80%. And you
can adjust the best listening volume by adjusting media player or
any music playback software’s volume control.
NOTE
If you hear no sound after the installation, please shield the
optical sensor switch on top of the speaker as the speaker might
turn OFF while installing, the optical sensor is effective within
5~10mm.
