people want automatic smart chargers. Overcharging batteries causes irreparable damage and
shortens the life significantly, that is why our smart charger takes this into account constantly.
Quick Connect Plugs & Accessories:
KeyLine chargers uses quick connect universal SAE
cords to accept other KeyLine accessories and adapters; we made it universal so that you can use
accessories that you may own already and still be able to use this great charger. Quick Connect plugs
are also great so that you can leave your battery terminals connected and then connect and
disconnect the charger with ease and quickness.
Two accessories/connection types are included with the charger.
One (1) fused ring terminal with an SAE universal quick connect connector. The ring terminal
connector can be used for a more semi-permanent connection. For example, if you want to leave the
connectors on the battery while you use the vehicle, you can simply disconnect the charger at the
quick connect point and put the included cover on the SAE connection and you can then use the
vehicle without concern of a short due to the cover and the failsafe fuse incase it were to short for
some reason. Many ATV, motorcycle and watercraft owners use the ring terminals like this.
One (1) fused alligator clips are included as well and are typically used for often connected and
disconnected vehicles or externally charged batteries.
Multiple Battery Type Compatibility:
KeyLIne uses advanced micro computing to
adjust charging to multiple types of batteries. The Mini-Pro is optimized to be compatible with all
Lead-Acid and Sealed (AGM, GEL, MF) batteries.
Important Safety Information
1)
Save these instructions
2)
Do not submerge charger in water or liquid (it is water and dust resistant but not
waterproof)
3)
ONLY use this charger to charge rechargeable batteries. DO NOT use this charger to
supply power to low voltage electrical systems.
4)
Use of an accessory or attachment not manufactured or recommended by KeyLIne may
result in a risk of fire, electric shock or personal injuries.
5)
To ensure a long lasting charger and cord please remove connection from receptacle by
the plug rather than pulling on the cord when removing charger from the AC source.
6)
Extension cords should not be used unless absolutely necessary. If an extension cord
must be used we recommend using KeyLine SAE extension cords. Use of an improper
extension cord can result in risk of fire, electric shock or personal injuries. If an extension
cord must be used, be sure that.
a.
Extension cords plugs and pins match the same number size and shape of the plug
on the charger
b.
Extension cord is in good electrical condition and is wired properly
c.
Wire gauge of cord is thick enough for AC ampere rating of charger as specified in
table 1 below:
