KEYKING
GROUP
FPC1000 Biometric Controller User Manual
（
V1.00
）
Page 37 of 43
Keyking FPC1000
1
．
FP-Module
2
．
WG Setting
3
．
Card Number Mode
4
．
Display Mode
5
．
Terminal Init
Keyking FPC1000
1
．
WG Out Type
2
．
WG Out Mode
Keyking FPC1000
WG Out Type: 0
0=Card
1=User ID
Keyking FPC1000
WG Out Mode: 2
0=None
1=26bit
2=34bit
4.5.2 WG Setting
Use this setting if connecting the FTP1000 as Fingerprint Reader to a Door Controller using Wiegand Protocol.
This type of connection provides higher security operation where the door is controlled from another controller
located in the secured area.
1. From the Device Menu, select 2, WG Setting.
2.
Select the option
0 FPC1000 will send the Card Number – work
only in Card, FP+Card, Card
1 FPC1000 will send the User ID number on
any authorized user in all modes.
0 Wiegand Output OFF
1 26 BIT Format
2 34 BIT Format
