1.8.
Battery connection
After installing the entire system and connecting all interfaces, you need to connect
the batteries.
Attention
! The system will not start up when only rechargeable batteries are
connected. The main power supply is required to start. During normal operation, the
system automatically charges batteries and monitors their operability.
1.9.
Adding keys
The keys are attached to the key fob with a 3 mm shackle
made of stainless steel. Shackle are disposable. Those. After fixing
the shackle in the key fob, it can not be pulled out. To replace the
key on the key fob, it is necessary to cut the shackle (bottom) at
the base of the key fob. A new ring with a new key should push
the remainder of the old shackle into the key fob and fix the new shackle. The Key Fob
has a chip with a unique number so the system could recognize the key by its key fob.
Programming of the key fob, key name and number is possible with the help of the
program SecuriProx Studio (supplied).
With the help of software, you can read information from key storage systems for all
unknown keyfobs (new keyfobs not entered into the system).
1.10.
Use of sealed key
boxes
In order to increase security, it is
possible to use key boxes to store
keys. In this case, the keys are also
attached to intelligent key fobs with a
unique chip, and then the key with the
key fob is inserted into a box, which
can be sealed in the standard way. The
delivery kit can include standard-size
boxes (70 mm) and elongated boxes
for long safe keys of up to 105 mm
long (the size from the center of the
hole to the tip of the key)
1.11.
Maintenance
Key storage requires service.
Periodically (once a year or more often if necessary), it is necessary to lubricate the door
hinges, movable parts of the lock (tongue) and the electro-latch with a silicone lubricant
spray.
