Keyestudio Smart Little Turtle Robot V3, Manual, Page: 178 / 230

178
www.keyestudio.com
void setup() {
Serial.begin(9600);// open serial monitor and set baud rate to 9600
pinMode(left_ctrl,OUTPUT);// set direction control pin of A motor to
OUTPUT
pinMode(left_pwm,OUTPUT);// set PWM control pin of A motor to
OUTPUT
pinMode(right_ctrl,OUTPUT);// set direction control pin of B motor to
OUTPUT
pinMode(right_pwm,OUTPUT);// set PWM control pin of B motor to
OUTPUT
servopulse(servopin,90);// the angle of servo is 90 degree
delay(300);
myMatrix.begin(112);
myMatrix.clear();
}
void loop()
{
avoid();// run the main program
}