Keyestudio Basic starter kit, Manual

Page: 109 / 109

keyestudio
www.keyestudio.cc
107
Sample program B
：
//////////////////////////////////////////////////////////
#include <Servo.h>// define a header file. Special attention here, you can call the servo function
directly from Arduino's software menu
bar Sketch>Importlibrary>Servo, or input #include <Servo.h>. Make sure there is a space
between #include and <Servo.h>. Otherwise, it will cause compile error.
Servo myservo;// define servo variable name
void setup()
{
myservo.attach(9);// select servo pin(9 or 10)
}
void loop()
{
myservo.write(90);// set rotate angle of the motor
}
//////////////////////////////////////////////////////////
Above are the two methods to control the servo. You can choose either one according to your liking or
actual need.