9
GB
Ki Hwang, Lee
Senior Managing Director
Yoon Sung, Lee
EU Branch Manager
In case an operation of drilling into concrete
and stone is carried out, be sure to attach the
side handle for safety before starting operation.
Be sure to wear protective gloves for changing
hot tool bit during operation.
Be sure to put off the switch and unplug power
cord before attaching or detaching a tool bit.
EC Declaration of conformity
We declares that these products meet the standards
EN 60745-1, EN 60745-2-6, EN 55014-1, EN 55014-
2, EN 61000-3-2 and EN 61000-3-3 (Category I),
EN50581 in compliance with directives 2006/42/EC,
2004/108/EC, 2011/65/EU.
KEYANG ELECTIRIC MACHINERY UK BRANCH
Abbey House, Wellington Way, Brooklands
Business Park, Weybridge, Surrey. KT13 0TT.
United Kingdom
6.Assembly
1. Rotating the Side Handle and
Adjusting Stopper
For convenience in operation, assemble the side
handle at the front of too and perform.
Rotating the Side Handle
1. Turn the side handle counterclockwise to unfasten
the band and band holder.
2. Turn the side handle to a desired position.
3. Turn the side handle clockwise to completely
fixed.
Adjusting Stopper Position
1. Press the button of stopper holder and insert the
stopper into the band holder.
2. The knurled surface of the stopper must face on
one side.
3. Make adjustment such to let the stopper move
into desired position. (When stopper is used,
boring to the extent as clearance between the drill
bit and stopper is available.)
Left-hander should assemble the side handle in
reverse direction and position before starting
operation.
2. Attaching and Detaching Tool Bit
Attaching and Detaching SDS-plus Bit
1. Wipe the bit and insert clean and coat grease
before attaching it.
2. Check dust cover for clean. Change the dust over
with new one if it is broken and clean it.
3. After inserting the bit, turn to a position you hear
click.
4. After attaching the bit, test to pull into out to check
for firm attachment.
5. To detach the bit, turn the retainer in direction of
arrow and remove.
Changing the Drill Chuck
For drilling in wood, metal, ceramic and plastic as
well as or screw driving and thread cutting, a
suitable drill chuck with SDS-plus shank must be
mounted.
1. Wipe the bit and insert clean and coat grease
before attaching it.
2. Check dust cover for clean. Change the dust over
with new one if it is broken and clean it.
3. After inserting the drill chuck, turn to a position
you hear click.
4. After attaching the drill chuck, test to pull into out
to check for firm attachment.
5. To detach the drill chuck, turn the retainer in
direction of arrow and remove.
7.Operating Instructions
1. Changing rotational Direction
1. RIGHT ROTATION : Turn the reverse knob
direction to the stop in position
2. LEFT ROTATION : Turn the reverse knob
direction to the stop in Position
Be sure to change rotational direction only in static
condition.
Abuse changing operation may cause broken tool.
Figure 3
Figure 4
Figure 7
Figure 8
Figure 5
Figure 6
Figure 2
Conversion of direction of rotation must use all
Rotational direction switch's both lever certainly.
130816 PHD-282B.283B(
).indd 9
2013-08-22 11:42:14
