Key Digital KD-SX440WP, Operating Instructions Manual

Page: 5 / 12

6 7
Analog L/R Input: Using a 3.5mm stereo cable, connect your audio source to be
associated with the VGA video input.
➔
Embedded with VGA Input
➔
1 VRMS line audio
➔
Sampling Frequency: 48kHz, Data Length: 24Bits.
IR Sensor: Collects line of sight infrared from remotes without external connecting
block
➔
Signal is output on Rx unit’s IR Out port
➔
Receives signals from a 90° angle at up to 30 ft.
➔
Accepts maximum IR burst frequency of 55kHz.
HDBaseT Output (rear): Connect a CAT5e/6 cable to the Rx Unit at the port
labeled “HDBaseT In”.
➔
UHD/4K: Up to 230 ft. (70m) using CAT5e/6
Up to 328 ft. (100m) using CAT6A STP / CAT7
➔
1080p: Up to 328 ft. (100m) maximum
➔
Must connect with KD-SX440RX only.
Not compatible with third-party HDBaseT Rx.
Connections, Buttons, and LEDs
KD-SX440WPTx Unit:
HDMI Input:
Using an HDMI cable, connect your HDMI source. For DVI-D/DVI-I
sources, use appropriate adapters. For Display Port, use active adapters
➔
Compliant with HDCP 2.2 and previous
➔
Maximum input resolution: 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2]
12bit, and 4096x2160 30Hz [4:4:4] 8bit
➔
Supports lossless compressed audio formats including Dolby
®
TrueHD,
Dolby
®
Digital Plus, Dolby Atmos
®
, and DTS-HD Master Audio
™
➔
Supports CEC
VGA Input: Using a Male 15pin VGA cable, connect your VGA source.
➔
Supported resolutions: 640x480@60/75, 800x600@56/60/75,
1024x768@60/75, 1280x720@60, 1280x768@60/75, 1366x768@60/75,
1280x1024@60/75, 1440x900@60/75, 1600x900@60, 1600x1200@60,
1920x1080@60, 1920x1200@60