
Page 15
System Output Set-Up Commands
To set Video Configuration Type:
»
‘SP C VT x’
To set the Video Input Format Type:
»
Where x = ‘0’ or ‘1’ and is the Video Type desired.
»
‘0’ = Component (YPbPr), ‘1’ = RGBHV (VGA)
»
Example:
To set the Video Input format type to RGBHV, issue the command;
‘SPCVT1’
To set Audio Configuration Type:
»
‘SP O xx T y’
To set the Audio Output Format Type:
»
Where xx = ‘01-99’ and is the Output number and y = ‘1-5’ and is the Configuration Type
desired.
»
Example:
To set Audio Type to 2 for Output 2, issue the command;
‘SPO02T2’
»
Example:
To set Audio Type to 1 for Output 3, issue the command;
‘SPO03T1’
»
Example:
To set Audio Type to 4 for All Outputs, issue the command;
‘SPOAT4’
Audio Configuration types listed below.
Audio Type #1 - Analog L&R Audio
»
Full Audio processing and control at analog outputs. PCM Audio Output from PCM Inputs
with PCM Audio in “pass-through” mode without audio processing or control. You may pass
any format of Digital audio through the PCM connections in this mode.
Audio Type #2 - Analog L&R Audio.
»
Analog Audio inputs to Analog Audio outputs with full processing.
Audio Type #3 – Analog L&R Audio.
»
Analog Audio inputs to Analog Audio outputs with full processing. Analog also converted to
PCM Audio at PCM Outputs. Full Audio processing at PCM Outputs. Will not pass encoded
multichannel content. (Dolby Digital, DTS etc.)
Audio Type #4 - PCM Audio.
»
PCM Inputs converted to Analog with full Audio processing to L&R Analog Outputs.
PCM Audio also available at PCM Outputs via “pass-through” mode. No audio processing.
PCM will pass all audio formats.
Audio Type #5 – PCM Audio.
»
PCM Inputs converted to Analog with full Audio processing to PCM outputs. Will not pass
encoded multichannel content. (Dolby Digital, DTS etc.)
To set Audio Output Volume:
»
‘SP O xx AV yy’
To set the Output Volume level:
»
Where xx = ‘01-99’ and is the Output number and yy = ‘00-99’ and is the Volume level.
»
Example:
To set Audio Volume of Output 3 to 50, issue the command;
‘SPO03AV50’