Page 13
Un-Mute Video ALL
»
To Un-Mute ALL Video Outputs: Select
‘R1-Video Mode – All Restore’
Un-Mute Audio ALL
»
To Un-Mute ALL Audio Outputs: Select
‘R1-Audio Mode – All Restore’
Audio Adjustment Commands
Output:
»
Audio Output adjustment ranges:
»
Volume = 00-96 (80 =default)
»
Bass, Treble & Middle Frequencies =00-24 (12 = default)
»
Balance = 00-40 (20 = default)
»
Lip Sync (Delay) = 00-99 (00 = default) each increment = 5.5ms
Volume Default
»
To return the Overall Output Volume for a specific Output number to the default setting:
Select the desired Output number, press the ‘Volume’ button, and then R3.
»
Example: To return the Output Volume of Output 2 to the default setting, press;
’R1-02-
Volume-R3’
Volume Level
»
To adjust the Output Volume for a specific Output number: Select the desired Output
number, press the ‘Volume’ button, and then enter the Value desired. You may also use the
Up or Down Arrow button to increase or decrease the Volume.
»
Example: To set the Volume level of Output 2 to 40, press;
’R1-02-Volume-40’
»
Example: To increase or decrease the Volume level of Output 2, press;
‘R1-02-Volume-
▲
’
to increase and
‘R1-02-Volume-
▼
’
to decrease.
IR Extender:
You may also want to use an IR extender, such as the KD-IRKIT300: A rear panel sensor is available
for use with the IR extender. A wired IR serial connector is also provided. Mount the IR extender on
the side of the KD-MSVA4X4Pro unit, or connect the serial connector cable.
Connecting Block
KD-IRCB204
KD-IRB3099
Back of the Unit
Wired IR Extender
3.5mm male-to-male
mono cable
Wired IR Extender KD-IRB3099 Unit Uses a 3.5mm male-to-male Mono cable
