Page 8
Page 9
Mechanical / Technical Specifications
Inputs
4/3/2 HDMI Connectors
Outputs
1 HDMI Connector
Bandwidth
TMDS bandwidth 10.2 Gb/s
Compliance With
HDMI Standard
Supports HDMI1.3+, HDMI1.2, HDMI1.1, DVI1.1 and HDCP.
Link
Single Link: 1080p/60, 12 bit color depth, 1920x1200 max.
Deep Color Support
Supports digital video formats in Deep Color Mode
at up to 12 bits/color
Lossless Compressed
Digital Audio
Supports lossless compressed digital audio
(Dolby
®
TrueHD, Dolby
®
Digital Plus and DTS
™
-HD Master Audio)
DDC Signal (Data)
Input DDC Signal: 5 Volts p-p (TTL)
HDMI Video/Audio Signal
Input Video Signal: 1.2 Volts p-p
HDMI Connector
HDMI Connector: Type A, 19 Pin Female
I2C Communication
EDID and HDCP Bi-Directional Transparency from Display to
Source
EDID Control
Active outputs connected via HDMI, or from internal library of
default 4 EDID settings
Control
For RS-232 Db9 Female connector for Tx, Rx and ground.
For IR two optical windows and wired 3.5 mm female mini-stereo
connector. Push button and top LED’s.
Switching
Switching of all Video and Audio simultaneous
Power Source
5 Volt DC @ 1 Amp, 100-240 VAC, 50-60 Hz
Dimensions
W=8.5”, H=1.75”, D=4”
Weight
2 Lbs
Important Product Warnings:
1.
Connect all cables before providing power to the unit.
2.
Test for proper operation before securing unit behind walls or in hard to access spaces.
3.
If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support
with bolts or sheet-rock anchors.
Safety Instructions.
Please be sure to follow these instructions for safe operation of your unit.
1.
Read and follow all instructions.
2.
Heed all warnings.
3.
Do not use this device near water.
4.
Clean only with dry cloth.
5.
Install in accordance with the manufacturer’s instructions.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
7.
Only use attachments/accessories specified by the manufacturer.
8.
Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way including:
»
Damage to the power supply or power plug
»
Exposure to rain or moisture
You MUST use the Power Supply provided with your unit or you VOID
the Key Digital
®
Warranty and risk damage to your unit and associated equipment.
How to Contact Key Digital
®
System Design Group (SDG)
For system design questions please contact us at:
½
Phone: 914-667-9700
½
E-mail: [email protected]
Technical Support
For technical questions about using Key Digital
®
products, please contact us at:
½
Phone: 914-667-9700
½
E-mail: [email protected]
Repairs and Warranty Service
Should your product require warranty service or repair, please obtain a Key Digital
®
Return Material
Authorization (RMA) number by contacting us at:
½
Phone: 914-667-9700
½
E-mail: [email protected]
Feedback
Please email any comments/questions about the manual to:
½
E-mail: [email protected]
Warranty Information
All Key Digital
®
products are built to high manufacturing standards and should provide years of
trouble-free operation. They are backed by a limited two-year parts and labor warranty.
