Key Digital KD-FIX418A, Operating Instructions Manual

Page: 5 / 10

6 7
For all audio de-embed outputs:
›
There are no volume or tone control features
›
There are no DSP features
Audio Input
Signal Format
Audio L/R
Output
Digital Audio
Output
2ch PCM Pass-Through Pass-Though
Multi-Channel PCM Front L&R Pass-through MUTE
Dolby DTS MUTE Pass-Though
HD Audio MUTE MUTE
RS-232:
›
3.5mm tip, ring ,sleeve (stereo) connection
›
Commands and feedback found in the RS-232 Commands section
›
Communication typically done with third-party terminal software like TeraTerm or PuTTY
›
Pin out:
»
Tip = RS-232 Tx Data
»
Ring = RS-232 Rx Data
»
Sleeve = RS-232 Ground
EDID Handshaking Rotary:
EDID authentication is provided from the KD-FIX418A to the connected input/source
›
The EDID file (AKA “handshake”) is selected using the EDID rotary on the unit and
provides a list of compatible video and audio formats as well as digital data, informing
the source device what it should output.
›
Most sources will comply with a new EDID file without a power-cycle, but devices do
behaves differently
›
Adjustments may speed up sync time during source selection.
Supported standard 4K Video Formats:
Resolution Bandwidth
1 4K@24/25/30 [4:4:4] 8bit < 10.2Gbps
2 4K@24/25/30 [4:2:2] 8/10/12bit < 10.2Gbps
3 4K@50/60 [4:2:0] 8bit < 10.2Gbps
4 4K@24/25/30 [4:4:4] 10/12bit < 18Gbps
5 4K@50/60 [4:2:2] 8/10/12bit < 18Gbps
6 4K@50/60 [4:2:0] 10/12bit < 18Gbps
7 4K@50/60 [4:4:4] 8bit < 18Gbps
AUDIO OUTPUTS:
Analog L/R Audio Output:
›
3.5mm stereo jack with de-embedded
audio from the selected HDMI source
›
Drives audio signals up to 1 VRMS with a sampling rate of 192KHz
›
Automatically mutes if audio formatting is not PCM 2ch
PCM Digital Audio Output:
›
RCA audio output with de-embedded audio from the selected HDMI source
›
SPDIF IEC 60958 format
›
Compatible with sampling rates up to 192KHz
›
Supports multi-channel Dolby ® and DTS ™ surround formats up to 5.1
›
Automatically mutes if audio formatting is not PCM, Dolby
®
, or DTS
™