4
5
Quick Setup Guide
CONNECT:
1.
Begin with the KD-FIX418A unit, input and output devices turned off with
power removed
2.
Connect your HDMI sources to KD-FIX418A’s input port
3.
Connect your HDMI display to KD-FIX418A’s output port
4.
Connect analog and/or digital audio outputs to amplifier, DSP, AV receiver, or sound bar
5.
Screw-in the power supply to KD-FIX418A, then, plug-in to power outlet
6.
Power on input and output devices
CONFIGURE
:
The default EDID handshake is 4Kx2K@60, 18G, HDR, 2ch audio
(setting A) with 18G signal bypass. Use the EDID rotary to choose
desired handshake to provide to connected source and the slide-
switches to adjust 18G signal and hot plug detection handling.
Rack Mounting:
In addition to mounting with the supplied L-Brackets, multiple KD-FIX418A may be
mounted in KD-SMS16 using the side mounting screws. KD-SMS16 is a mounting shelf
for Key Digital units with side mounting screw spacing of 2.912”, 2.582”, or 2.252”.
Do NOT exceed 12 units as doing so will result in unit damage by overheating.
Connections, LEDs, Slide Switches, and Rotaries
VIDEO INPUTS AND OUTPUTS:
HDMI Input:
›
The HDMI input is located on the short end beside the power.
›
Blue
LED near the HDMI connector illuminates solid to indicate an active HDMI signal
is incoming.
HDMI Output:
›
The HDMI output is located on the short end beside the RCA PCM
›
Blue
LED near the HDMI connectors illuminates solid when Hot Plug Detection (HPD)
is received from the display/output device and there is an active incoming HDMI
signal.
›
The LED will blink steadily when there is no HPD from the display but an active HDMI
signal is incoming.
HDMI Input/Output Port Specifications:
›
Supports up to UHD/4K @ 50/60 fps [4:4:4], 18Gbps signals
›
See Supported standard 4K Video Formats table
›
Supports HDR10
›
Compliant with HDCP 2.2 and previous
›
Supports lossless compressed audio formats including Dolby
®
TrueHD, Dolby
®
Digital
Plus, DTS-HD Master Audio
™
, and Dolby Atmos
›
CEC pass-through from display to HDMI source
›
For Display Port sources/monitors, use active converters
Summary of Contents for KD-FIX418A
Page 10: ...16 17...
