KD-VPHD3 Operating Instructions
Page 0
KD-VPHD3 Operating Instructions
Page
5. Output Resolution Menus
a. Output Resolution
i. 640x480p
ii. 720x480i/P
iii. 720x576i/P
iv. 1920x540P
v. 1280x720P
vi. 1280X768P
vii. 1366/1368x768P
viii. 1400x1050P
ix. 1920x1080i/P
b. Output Resolution Default – Sets the
output resolution of the KD-VPHD3 back
to the default setting of 1280X720P
6. HDMI Menus
a. HDMI Input CSC
i. Auto
ii. RGB
iii. YCbCr
b. HDMI Output CSC
i. Auto
ii. RGB
iii. YCbCr
c. HDMI Output Setup
i. HDMI
ii. DVI
7.
Analog Output Menu
a. RGBHV
b. YPbPr
8. Test Patterns
a. Input Test Pattern – the input test
pattern is inserted at the input of the scaler
circuit.
i. Normal - This setting disables
input test patterns from being sent to
the KD-VPHD3 video outputs and is
used for normal operation of the unit.
ii. Cross-Diaganol Lines
iii. Horizontal Ramp
iv. Vertical Ramp
v. Horizontal Gray Scale
vi. Vertical Gray Scale
vii. Horizontal Color Bars
viii. Vertical Color Bars
➔
»
»
»
»
»
»
»
»
»
➔
➔
»
»
»
➔
»
»
»
➔
»
»
➔
➔
➔
»
»
»
»
»
»
»
»
b. Output Test Pattern – the output test
pattern is inserted at the output of the
scaler circuit
i. Normal Display – This setting
disables output test patterns from
being sent to the KD-VPHD3 video
outputs and is used for normal
operation of the unit.
ii. Horizontal Ramp
iii. Color Bars
iv. Cross Hatch
v. White Window
vi. Gray Scale
vii. Wide Horizontal Ramp
viii. Wide Vertical Ramp
ix. Cross Pattern
x. White Pattern
9. Factory Default
Choosing this option and selecting ‘Yes’
confirmation will reset ALL parameters in
the menus above to their factory default.
See page 12 for default settings.
➔
»
»
»
»
»
»
»
»
»
»
➔
Setup and Operation
After all cabling is connected and the unit powered on, there are some functional settings
which need to be made. These include output resolution, screen and audio/video association
menu assignments as well as proper color space settings. Additionally, there are many detailed
parameters which can be adjusted to taste or to compensate for different sources and/or displays.
These parameters are grouped within the picture and screen menus.
The following detailed steps will facilitate easy setup and operation of the KD-VPHD3.
Setup
Configure the functional settings of the KD-VPHD3. It will help to have a video signal present at
selected input
Set desired output resolution
– Navigate to the ‘Output Resolution’ menu. Press the left
or right arrow button repeatedly until the desired resolution is displayed. These resolutions
take effect immediately and there is no need to press the ‘select’ button to engage the
setting.
Set the A/V associations
- Each video input is able to be associated with any audio
input. Navigate to the ‘A/V Association’ menu until the desired video input is displayed.
For example, to assign stereo analog input 1 to Component 1, go to ‘A/V Set Component
1’. Press the left or right arrow button until Stereo 1 is displayed. Assignment takes place
immediately.
Set the intended color space conversion (CSC) for HDMI Input/Output
– Proper color
space must be set for HDMI input and output. The correct setting depends on the source
and display characteristics. Navigate to the ‘HDMI In CSC’ or ‘HDMI Out CSC’ menu. There
is an ‘auto’ setting in these two menus which can be used most reliably. Alternatively, it may
sometimes be necessary to select either RGB or YCbCr color space conversion. With any
of the above menus, the correct setting will be apparent when viewing the display, as the
wrong setting will yield incorrect colors in the image. In order to determine, with accuracy,
what the correct settings should be, use the built-in color bar test patterns on the KD-
VPHD3 to assure proper setup.
Set the intended CSC for the analog video output
– Proper color space must also be
set for the analog video output. Navigate to the ‘Analog Out CSC’ menu and select either
YPbPr or RGB, depending on the requirement of the display. With the above menu, the
correct setting will be apparent when viewing the display, as the wrong setting will yield
incorrect colors in the image. In order to determine, with accuracy, what the correct settings
should be, use the built-in color bar test patterns on the KD-VPHD3 to assure proper setup.
Setup the HDMI output port
– Navigate to the ‘HDMI Out Setup’ menu. Use the left or
right arrow button to select either DVI or HDMI. When using DVI equipped displays and an
appropriate HDMI to DVI adapter cable out of the KD-VPHD3, set this menu to DVI. When
using HDMI equipped screens, set this menu to HDMI.
1.
2.
3.
4.
5.
KD-VPHD3_Manual_Final.indd 10-11
10/17/07 1:21:15 PM
