Control elements
1. Buzzer hole for sound indication
2. Single Pole Test ELV Warning
3. Continuity Test
4. Rotary field
5. LCD Display indication voltage,
polarity, resistance and low battery
6. LED’s indicating 12V and polarity
7. Voltage Indication
6.0 PREPARATION FOR TESTS
6.1 Auto-power-on / switching on
• The tester switches on when it detects continuity,
an AC or DC voltage above approx. 6V or a live
phase on L2 (single pole test).
• It can be switched on with the torch light button.
6.2. Auto-power off
• Tester is automatically powered off after 30 sec
when there is no signal contacted to the probes.
• The torch light switches off after approx. 30 sec.
6.3 Self-Test
• When voltage tester is off short both probes L1
and L2, hold probes shorted.
• All LEDs, all symbols on LCD and buzzer will be
on for a 2s.
• Self-test will start automatically when replacing
batteries.
If some of LEDs is not ON, or some LCD symbols
are not ON or Buzzer or Torch light is not ON, the
device is not safe for use. Replace the battery and
start Self-Test again. If some of these indications
