References marked on instrument or in instruction
manual:
Warning of a potential danger, follow with instruction
manual.
Reference! Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Equipment for working under live voltage
Continuous double or reinforced insulation category II
IEC 536 / DIN EN 61140.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(2014/30/EU), Standard EN 61326-1 are fulfilled. It also
complies with the Low Voltage Directive (2014/35/EU),
Standard EN61243-3:2014 is fulfilled.
UK Conformity compliance mark
Tester complies with the standard
(2012/19/EU) WEEE.
The instruction manual contains information
and references, necessary for safe operation and
maintenance of the tester.
Prior to using the tester (commissioning/ assembly)
the user is requested to thoroughly read the
instruction manual and comply with it in all sections.
Failure to read the tester manual or to comply with the
warnings and references contained herein may result in
serious bodily injury or tester damage.
The respective accident prevention regulations
established by the professional associations are to be
strictly enforced at all times.
Voltage tester is not a measurement device, it is only
allowed to use for testing purposes.
1.0 INTRODUCTION / PRODUCT PACKAGE
The voltage tester KT1795 is a universally applicable tester
for voltage testing, continuity testing, rotary field testing and
trip testing of RCD.
The voltage tester KT1795 is characterized by the following
features:
• Designed to meet international safety standards.
EN61243-3:2014
• Measurement Category (CAT.) IV 600V, III 1000V
• AC and DC voltage test up to 1000Vac and 1500Vdc
with LCD
• Polarity indication
• Single-pole phase test
• Phase rotation test
• Trip Test of RCD
• Continuity test
• Resistance test
• Auto-power ON / OFF
• Torch light
• IP64 (IEC60529)
• Lower load impedance option to clear ghost or
interference voltages
