The tester complies with all EMC regulations.
Nevertheless it can happen in rare cases that electric
devices are disturbed by the electrical field of the
tester or the tester is disturbed by electrical devices.
Never use the tester in explosive environment
Tester must be operated by trained users only
Operational safety is no longer guaranteed if the tester
is modified or altered.
The tester may be opened by an authorized service
technician only.
The current test may only be performed on double
insulated cables.
If the indication “voltage present” appears although the
checked part is considered as disconnected, it is recom-
mended to verify additional measures if the measured
voltage is an interference voltage or not.
4.0 INTENDED USE
The tester may be used only under the conditions and
for the purposes for which it was designed. Therefore,
observe in particular the safety instructions and the
technical data including environmental conditions.
5.0 INSTRUMENT LAYOUT
1. Test Probe, L1
2. Test Tip, L2
3. Torch Light
4. Display
5. Torch Light Button / selects
resistance measurement
6. Low impedance
Push buttons / RCD test
7. Main body
8. Battery door
