5
Technical data
– Power supply:
230 V AC/ 50 Hz
– max. Power consumption:
Prod. no.:
Width
Weight
Light
14597 171000:
460 mm
9.1 kg
45 W
14597 171500:
650 mm
9.4 kg
48 W
14597 XX2000:
700 mm
9.9 kg
50 W
14597 172500:
800 mm
11.0 kg
53 W
14597 173000:
900 mm
12.1 kg
57 W
14597 173500:
1000 mm
13.2 kg
60 W
14597 XX4000:
1050 mm
13.8 kg
62 W
14597 174500:
1200 mm
15.4 kg
70 W
14597 XX5000:
1400 mm
17.5 kg
77 W
– Protection rating:
IP20
– Ambient conditions:
Temperature
5°– 40° C
– Light colour
2700 - 6500 Kelvin
Mounting dimensions
, see page 2.
Circuit diagram
, see
fi
gure 1 on page 17.
Installation
, see
fi
gure 2 onwards on page 17.
Operation
The mirror can be optionally actuated similar to a toggle
switch with a button on the mirror
A
or with an external
button
B
(operating mode I.) or switch
B
(operating
mode II.), see circuit diagram
fi
gure 1 on page 17.
Button functions
Button Function
Light on/off
• Pressing the button switches the mirror on with the
selected settings. The white LED goes off.
• Pressing the button again switches the mirror off.
The white LED lights up.
• The white LED can be deactivated.
– Switch on the mirror.
– Press and hold the button for 10 seconds.
- The lighting goes off.
- A short light impulse indicates that the white
LED was deactivated.
To switch the white LED back on, repeat the de-
scribed procedure.
Button Function
Front lighting
• The front and wall lighting is switched on by press-
ing the button when mirror is switched on.
• Pressing the button again switches the light off.
Washbasin lighting
• The washbasin lighting is switched on by pressing
the button when mirror is switched on.
• Pressing the button again switches the light off.
When both lightings are switched off, the mirror also
switches off.
Dimming the front and washbasin lighting
• Press the button when the mirror is switched on
and hold until the desired brightness or the end
value has been reached.
The setting is stored and reproduced when switched
on again (only for connection type I, see
fi
gure 1 on
page 17).
Setting the light colour cooler
• Press and hold daylight white button and the light
colour fades to cool white.
• Release when the desired light colour has been
reached.
The setting is stored and reproduced when switched
on again (only for connection type I, see
fi
gure 1 on
page 17).
Adjusting light colour - daylight white (cool white)
• Press button and the colour temperature sets to
6500 Kelvin.
Setting the light colour warmer
• Press and hold warm white button and the light
colour fades to warm white.
• Release when the desired light colour has been
reached.
The setting is stored and reproduced when switched
on again (only for connection type I, see
fi
gure 1 on
page 17).
Adjusting light colour - warm white
• Press button and the colour temperature sets to
2700 Kelvin.
Replacement parts with order numbers
, see page 19.
The light sources may only be replaced by the
manufacturer, its customer service or by an equally
quali
fi
ed person.
For information about warranty and maintenance, see
the enclosed
Maintenance and Warranty Passport
.
Disposal information!
Equipment with this labelling
must
not
be disposed of in household refuse, but must
be disposed of at a collection centre intended for this
purpose.
Important information, please make sure to read!
EN
A
B
