Kettler EM1012-400, Manual

Page: 6 / 30

6
– EN –
Instructions for Assembly
RISK!
Ensure that your working area is free of possible sources of danger,
for example don’t leave any tools lying around. Always dispose packaging
material in such a way that it may not cause any danger. There is always a
risk of suffocation if children play with plastic bags!
n Ensure that you have received all the parts required (see check list) and
that they are undamaged. Should you have any cause for complaint, please
contact your KETTLER dealer.
n Before assembling the equipment, study the drawings carefully and carry
out the operations in the order shown by the diagrams. The correct se-
quence is given in capital letters.
n The equipment must be assembled with due care by an adult person. If in
doubt call upon the help of a second person, if possible technically talen-
ted.
n Please note that there is always a danger of injury when working with tools
or doing manual work. Therefore please be careful when assembling this
!
machine.
n The fastening material required for each assembly step is shown in the dia-
gram inset. Use the fastening material exactly as instructed.
n First, please screw all parts loosely together and make sure they are pro-
perly positioned. Turn the self-locking nuts, first by hand, until resistance is
felt, continuing subsequently against the resistance (security clamp) with
an appropriate tool, according to the indicated torque, until firm. Check all
screw/bolt connections for firm fit according to the assembly step. Attention:
self-locking nuts which are loosened once again will become unusable (de-
struction of clamping system) and must be replaced with new ones.
n For technical reasons, we reserve the right to carry out preliminary assembly
work (e.g. addition of tubing plugs).
Handling the equipment
ATTENTION!
It is not recommended to use or store the apparatus in a
damp room as this may cause it to rust. Please ensure that no part of the
machine comes in contact with liquids (drinks, perspiration etc.). This may
cause corrosion.
n Before using the equipment for exercise, check carefully to ensure that it
has been correctly assembled.
n Before beginning your first training session, familiarize yourself thoroughly
with all the functions and settings of the unit.
n A slight production of noise at the bearing of the centrifugal mass is due to
the construction and has no negative effect upon operation. Possibly oc-
curring noise during reverse pedalling result from engineering and are ab-
solutely safe.
n The exercise cycle has a electro magnetic brake system.
n To operate correctly, the pulse function requires a minimum voltage of 2,7
volts (only for computers working with batteries).
!
n Before use, always check all screws and plug-in connections as well as re-
spective safety devices fit correctly.
n Always wear suitable shoes when using.
n For a comfortable training position please adjust the handlebar andsaddle
position to your body height.
n Nobody may be in the moving range of a training person during training
n This manual can be downloaded from www.kettler.com.
n The equipment is dependent / independent of revolutions per minute, de-
pense on the Computer mode.
RISK!
Protruding adjustment devices can endanger the movement of the
user.
www.kettlersport.com
!
Maintainance – Service – Spare Parts
n Damaged components may endanger your safety or reduce the lifetime of
the equipment. For this reason, worn or damaged parts should be replaced
immediately and the equipment taken out of use until this has been done.
Use only original KETTLER spare parts.
n To ensure that the safety level is kept to the highest possible standard, de-
termined by its construction, this product should be serviced regulary (once
a year) by specialist retailers.
n Please ensure that liquids or perspiration never enter the machine or the
electronics.
Spare parts order
n When ordering spare parts, always state the full article number, spare-part-
number, the quantity required and the S/N of the product (see handling).
Example order: Art. no. EM xxxx-yyy / spare-part no. 67001415 / 2 pieces
/ S/N ....................
Waste Disposal
KETTLER products are recyclable. At the end of its useful life
please dispose of this article correctly and safely (local refuse
sites).