Start-up
3062.72-01 Rev. A
S e i t e
|
22
6
Start-up
DANGER!
Danger due to electric shock!
Incorrect installation or damaged live cables can result in electrical
hazards and thus death and serious injury.
►
Make sure that all installation instructions have been followed
before initial start-up.
►
Be sure to connect all PE protective conductors and ground
conductors before initial start-up and make sure that the RCD
and fuse are functional.
►
Before start-up, have the electrical installation checked by a
trained qualified electrician in accordance with the standards
and regulations applicable in the country of use.
WARNING!
Danger due to unexpected start-up!
During initial start-up, the motor may run unexpectedly. If persons
and / or objects are in the danger zone of the application, serious
injuries and / or material damage may occur.
►
During initial start-up, only activate the drive system if there are
no persons or objects in the area of the application so that you
can intervene in the case of danger. You must have visual
contact with the application/danger zone at all times. Visual
contact must be maintained until the end of motor activity.
►
Before initial start-up, make sure that there are no persons or
objects in the danger zone.
WARNING!
Danger due to breaking!
Incorrect installation or non-compliance with the operating
parameters of the drive system may result in breakage during start-
up. Injuries and / or damage to material are possible.
►
Only operate the drive system within the range of approved
operating parameters.
►
Before initial start-up, make sure that all installation instructions
have been taken into account.