FINAL ASSEMBLY
Use and Maintenance:
CLEANING A STANDARD MIRROR SURFACE:
-Mirror and mirror body are constructed of mirrored glass and aluminum. Use a damp cloth
to clean your mirror. Do not use any abrasive material as it may damage the surface and
finish of the mirror.
-A mild detergent may be used to clean the surfaces of the mirror.
-When cleaning, spray the cloth, not the mirror or surrounding surfaces.
How to use Defogger Feature and Dimmer Switch:
** if applicable
Adjusting Kelvin Temperature:
To change the Kelvin temperature, simply double tap the
sensor.
Kelvin temperature options are: 3000K, 4500K, and 6000K.
Adjusting the Brightness:
To adjust the brightness, hold down the
sensor and it will begin to fade down. To increase the brightness,
tap and hold the sensor again.
Operating the Defogger:
To turn on the defogger, tap the
sensor. When you hear a click, the defogger is now turned on. The
defogger will take approximately 5 minutes to heat up. To turn off the defogger, tap the touch sensor again, and
you will hear defogger unit click off.
